Product Description
Why Choose This 6AN Braided Hose?
✅ Three-Layer Construction for Maximum Durability
Inner Layer: CPE (chlorinated polyethylene) rubber – resistant to fuels, oils.
Reinforcement: 304 stainless steel wire braid – provides high pressure tolerance and prevents kinking.
Outer Layer: Nylon braid – resists abrasion, UV damage, and external wear.
This combination ensures long service life even under harsh conditions.
✅ Designed for High-Pressure Systems
Working Pressure: 750 PSI
Burst Pressure: 2,250 PSI (safety margin for pulse applications)
Temperature Range: -22°F to 248°F (-30°C to 120°C)
Suitable for fuel injection systems, turbo oil lines, and hydraulic clutches.
✅ Versatile Fluid Compatibility
Use with:
Gasoline (including race gas and ethanol blends up to E85)
Diesel and biodiesel
Engine oil and synthetic oil
Automatic transmission fluid (ATF) and power steering fluid
Hydraulic fluid and coolant (not for steam or brake fluid)
Vacuum and boost reference lines
✅ 6AN Standard Size – Easy Integration
Inner Diameter (ID): 0.31 inch (7.9 mm)
Outer Diameter (OD): 0.56 inch (14.2 mm)
Compatible with standard 6AN swivel hose ends (sold separately) – no adapters needed.
The 20-foot length gives you ample material for multiple runs or one long installation.
✅ Endless Under-Hood & Marine Applications
Fuel Systems: Supply lines, return lines, filter-to-rail connections.
Oil Systems: Turbo oil feed/drain, remote oil cooler lines, dry sump plumbing.
Cooling: Transmission cooler lines, power steering returns, coolant overflow.
Marine & Industrial: Fuel hoses for boats, generators, and hydraulic equipment.
How to Cut & Assemble:
Measure and cut the desired length with a sharp hose cutter or fine-tooth saw.
Wrap the cut area with tape to prevent fraying while cutting.
Remove tape and clean debris from the hose end.
Install compatible 6AN swivel hose ends (not included) following the manufacturer’s instructions – typically involving inserting the hose, pushing the socket, and tightening.
Perform a pressure test before final use.
Notes & Warnings:
Do not use this hose for brake systems or any application exceeding the rated pressure/temperature.
Always use compatible 6AN hose ends – other fittings may leak or fail.
Inspect the hose regularly for cuts, abrasion, or bulging. Replace if damaged.
Use appropriate hose clamps or fittings – barbed fittings are not recommended for high-pressure fuel systems.
Technical Specifications:
Hose Size: 6AN (also known as -6)
Inner Diameter: 0.31 inch (7.9 mm)
Outer Diameter: 0.56 inch (14.2 mm)
Length: 20 feet (6.1 meters)
Working Pressure: 750 PSI
Burst Pressure: 2,250 PSI
Temperature Range: -22°F to 248°F
Inner Material: CPE rubber
Reinforcement: 304 stainless steel wire braid
Outer Cover: Nylon braid
Color: Black
What’s in the Box:
1 × 20FT 6AN Braided Fuel Line Hose (Black)
