Product Description
FIF-CS 8 screw fixing; screw fastening for external thermal insulation composite systems (ETICS); support materials: building material classes A, B, C, concrete, solid brick, solid brick, calcium silicate, solid block block in lightened concrete; semi-solid brick (perforated vertically) brick; semi-solid brick (perforated vertically). vertically) calcium silicate hollow block made of lightweight concrete; advantages: The composite screw minimizes the thermal bridge; thus does not show traces of fixings on the facade; less wear of the tip and drilling time thanks to a minimum installation depth of 35 mm in the support; the disc adapts perfectly to the insulation thanks to its thickness of only 2.5 mm, this allows the application of thin shaving layers; Can be combined with retaining discs DT 90, DT 110 and DT 140 for very soft insulating materials; for insulation materials thickness up to 340 mm; applications: Fixing insulating panels of composite external thermal insulation systems (ETICS) on concrete and masonry; wire installation in insulating materials of composite thermal insulation systems (ETICS), e.g. polystyrene and mineral wool; operation: Fixing is suitable for installation Loop; Standard installation: Screw the composite screw using a screwdriver; Surface wire installation: screw the composite screw by mounting the CS mounting tool and CS bits on a standard screwdriver; non-bearing layers such as the existing adhesive or plaster are included in the maximum useful length; for drilling in perforated masonry we recommend the use of SDS Plus 8/100/400 (see page 633) with sharp carbide plate and SDS Plus geometry coupling optimized for impact reduction in rot-cussion drilling; Technical specifications: References: EAN: 4048962225174; Fischer code: 533763
