MAYASAF 513024 Front Wheel Bearing for 1986-89 for Acura Integra, 1988-91 for Honda CRX/1984-91 Civic/1984-87 Wagovan, 1987-88 Sterling 825/1989-91 827

Simplified Fitment Application (Please Use Amazon Part Finder at the top of this page, Enter your vehicle detailed information to make sure Fitment): 1986-1989 for Acura Integra 1988-1991 for Honda CRX 1984-1991 for Honda Civic 1984-1987 for Honda Wagovan 1987-1988 Sterling 825 1989-1991 Sterling 827 Note: Wheel Hub Bearings must be torqued to vehicle specifications to prevent failure. Installation Tips 1. Raise the vehicle and remove lug nuts and wheel rim. 2. Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire. 3. Remove the axle nut, using an axle nut socket. Follow the manufacturer’s instructions for nut replacement. 4. Disconnect the ABS sensor wire from its mating connector point and positioning clips. *Make a note of the proper orientation and positioning of the sensor wire and bearing. 5. Remove the steering knuckle attachment bolts. *You may need a puller to remove the hub assembly. DO NOT damage the knuckle or axle shaft. 6. Remove the old hub, Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone. 7. Reverse the above steps and actions to install the new wheel hub back. *Professional Installer Recommended *No Instruction Included